Maintenance & Technical > KX500 Original

i need to know the thread pitch on the flywheel center bolt

(1/1)

jdb1989:
i sheared the bolt and i need to know the pitch i know its a 12.anything will help thanks

Friar-Tuck:
  Does this look like the critter ?  1989 KX500 (KX500-E1)

http://www.xtremeusa.com/fiche_section_detail.asp?section=381744&category=Motorcycles&make=KAWASAKI&year=1989&fveh=8824

  (when you open the window, move the blue dot to the left and shrink the view, the crank will come into view)
       NUT-12MM     92015-1156
   
http://www.xtremeusa.com/fiche_section_detail.asp?section=381771&category=Motorcycles&make=KAWASAKI&year=1989&fveh=8824

            Are you saying the end of the crank sheared off with the nut?
 Tuck\o/

  Doohhh!!!  Link Repaired My Apologies!

RoostDaddy:
Tuck, thats for an EX500.

JDB you are correct its a 12mm, and i believe its 1.25 thread.  (as I assume you are talking the flanged nut)

dave916:
there is no bolt there to shear , just the crankshaft and 12m nut that could strip the treads,  sayin that i have seen the nut welded to crank when the treads had been damaged

Navigation

[0] Message Index