Maintenance & Technical > KX500 Original

Shock Rebuilding

<< < (2/4) > >>

Paul:
http://www.pitbull-racing.com/index.php?name=PNphpBB2&file=viewtopic&t=449&highlight=shock+rebuild

YUNGGUNNAZ:
after viewing the how to page and still want it done try PRO CLASS CYCLES .804-232-2300.BOB AND LANCE used too race kaw's or Rob at screaming bike 804-843-4548.

GreenMachine:
I just used that post to rebuild my shock. Thanks Rick! It was a piece of cake cept for the fact that he doesn't mention how hard it is to get the shaft back up the first time you push it all the way to the bottom to get the air out. Also the guy from Palo Verde MX said to inflate the bladder to 40 - 50 psi before filling the piston side then once the air is out of that side and you are getting ready to install the seal cap to deflate it as you install the seal. Supposed to help keep the bladder the right size and make sure thge right amount of oil is in the shock. Thanks again Rick!

Jody

Paul:
John over at Palo Verde is a good guy. Both he and Randy are some top notch suspension tuners :wink:

beastrider500:
Try Bumpsticks in Huntingtown, MD. Might be a bit of a drive for you but well worth the trip. Phone number is 410-535-0625.

Navigation

[0] Message Index

[#] Next page

[*] Previous page