Maintenance & Technical > KX500 Original
Rebuilding 5 hunny ???s
kawdude:
--- Quote from: Rick ---
Finally, on the stator plate, if the crack allows the stator plate to move, it is a problem. If you need one, you have a problem, as the backing plate is not sold seperately. However, I happen to have one in the shop that should work. We would have to check part numbers, as mine is from a 2002, but if it works, I am sure we can work a deal.
Enjoy the rebuild.
Rick
--- End quote ---
Rick, Let me know how much you want for this plate.
Rick:
Here's the scoop on the plate.
I have been trying to get a lighting coil for some time now, but apparently, the only manufacturer of the coil made them too big. I was able to get my hands on one of the "too big" units, and it is sooooo thick, you can't even get the flywheel in place by about 1/4 inch.
One solution is to use the old plate I have and mill the mounting point for the lighting coil so it will accept one of the "tall" light coils. another option is to just make a new stator plate that will accept the tall coil, but a lot more work. Both solutions are last resort, as I would rather have the correct lighting coil, just can't seem to get my hands on one.
With all of that said, assuming I can get the correct lighting coil to slap on the 500, I'll give you my old stator plate for free if you just pay for the UPS. If you are in the US, probably less than $10. Unfortunately, since I have waited a month for a lighting coil, I won't know for a couple of weeks if I am going to need to whittle me a new stator plate, or if the correct lighting coil will be manufactured any time soon.
What do you think, can you wait a couple more weeks?
Rick
kawdude:
Does anyone know if any KX coil will fit the big KX. The coil on the stator plate
kawdude:
--- Quote from: Rick ---I'll take a look at home for the case sealer, but several folks make this stuff. I really like the product from ...uh...errr...Honda :oops: . I know, I know, but heh, we use what works. .
Rick
--- End quote ---
What Honda bond stuff should I use. Number 4???
Rick:
Kawdude,
I appologize for not resonding to your coil question (Not sure what I was thinking). Were you talking about the stator coil? If so, I have two extra coils in my shop. If you are talking about the CDI trigger, well....
Rick
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version