Maintenance & Technical > KX500 Original

no pull at top end

<< < (2/2)

Motorrad:
165 seams bit lean for 1000ft and the pipe your running

slower than u:
it ran good with the 165 in it but it was(cold) in the 50s, since it warmed up it hasn't ran good. so i don't know if its the jetting or kips out of wack.

slower than u:
 kxcam the linkage lookeded fine,its hooked up c clamp and pulls out. what else do i need to check on the kips. sorry to sound bumb but never messed with the kips system. thanks for the help

Navigation

[0] Message Index

[*] Previous page