Maintenance & Technical > KX500 Original

mid rpm bog

<< < (2/2)

stock500:
Snoop, you need to get some Amsoil Intercepter, and run it at 50:1.  You may need to fatten up the jetting one size, but your bike will like it.  I run that oil at 50:1, and my bike likes it. 

snoopjonnyjon:
So, if my crankcase has a bunch of oil pooled in it... what's the best way to deal with it? Just run at high speed for an extended period of time, or do I need to get in there to clear it out?

Polar-Bus says to jet leaner... stock500 says go richer. Any agreement here, or should I just leave the jetting alone for now and try less oil in the premix?

martinfan30:

--- Quote from: stock500 on May 06, 2009, 05:36:23 AM ---Snoop, you need to get some Amsoil Intercepter, and run it at 50:1.   You may need to fatten up the jetting one size, but your bike will like it.  I run that oil at 50:1, and my bike likes it. 

--- End quote ---

If you go leaner on the oil ratio, why would you increase the A/F ratio more to be even richer? Isn't it fact that when you go lean on oil ratio, that the A/F ratio richens?

Navigation

[0] Message Index

[*] Previous page