Maintenance & Technical > KX500 Original

ASV Brk lever for K5

(1/5) > >>

Hick:
Has anyone out there used the asv brk lever on their K5 if so how did you mount it.  I  am not sure how to attach the plunger to the lever it is a little different than the stock one.  I will call the company when i get a chance during bus hours but if someone out there has dealt with this I am all ears.

Platypus:
You don't attach the plunger.  There is an adjustable screw that pushes the plunger in.

Hick:
So if i got this right you adjust that long screw in and then fit it into the hole on the back of the lever.  Does that sound right?  If so did you have any problems adjusting that screw i cant seem to get it to budge.

Platypus:
I did not have any problems.  Make sure you loosen the large nut that holds the screw in place.

Hick:
Copy thanks for the info thats how it looked but wanted to make sure before i screw something up.  Will try to today after work.

Navigation

[0] Message Index

[#] Next page