Maintenance & Technical > KX500 Original

Vforce

(1/5) > >>

Motorrad:
Okay... I have searched and read..... I have heard both..
http://www.kxriders.com/forums/index.php/topic,2708.0.html

Vforce 2 vs Vforce 3....   obviously the 3 is for the 250's.... is there a phisical size differance to where its going to unstuff the crank case per say..


If somone out there has PHYSICAL MEASUREMENTS.. that would be nice.... Im about to buy some reeds, and dont want the "unstuffing" affect the 3's may pose. As I hear they are narrower (width) than the delta 2's....  Straight off the bat (look at the links)  I can see what I think is the restrictor plate everyone referes to...


here are the 3's..
http://cgi.ebay.com/ebaymotors/KAWASAKI-KX250-VFORCE3-VFORCE-3-REED-CAGE-KX-250-87-04_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQhashZitem360110835640QQitemZ360110835640QQptZMotorsQ5fATVQ5fPartsQ5fAccessories

and a link to the 2's..

http://www.kxriders.com/forums/index.php/topic,3606.0.html

Motorrad:
I remember reeding somewhere that the SXI 750 reeds fit the KX..... 

Looking at these. they seem to be them??

http://www.customski.dk/intake_fuel/kawasaki/sxi_750/v_force_3_for_all_kawasaki_750_800_twins_461_en.html

kaw rider:
the kx250 v-3 work great with stock size carb.   The v-3 for the jetski was made for bigger 44-48mm carbs.

stewart:
i have seen reed selection really slow down a motor ,, to the tune of 20 hp ,,,i know the v2s work

Motorrad:
INTERESTING.....    if the 750 sxi stuff does fit.. .check out Item #6 from the top...
http://www.xbjracing.com/pro/jetski/kawa_750twin.html

Navigation

[0] Message Index

[#] Next page