Maintenance & Technical > KX500 Original

Pro Circuit rear suspension links

<< < (2/2)

serafin:
Demographic without taking the suspension apart.  I measured from bolt center to bolt center and came up with aprox 5 3/8 inches.

Serafin

Motorrad:
Stumbling around over on Destrys board. and tripped over this...

http://destryabbott.invisionzone.com/index.php?showtopic=1207


also just stumbled across this

http://www.kxriders.com/forums/index.php?topic=885.0

cr37:
They are to help the bike corner better by raising the rear of the bike and putting more wieght on the front wheel also it changes the fork angle. I made set for my K5 an d helped the cornering a lot.

demographic:
Just measured both of my Pro Circuit ones and one was 132.62 mm long and the other was 132.60mm long, call it an average of 132.61mm

I doubt two hundredths of a milimeter makes any difference.

Not measured my standard Kawasaki ones yet though as they are still on the bikes.

Dutch-K5 Fan:
Stock sould be 134mm

Navigation

[0] Message Index

[*] Previous page