Maintenance & Technical > KX500 Original

help jammed

<< < (2/2)

peppe70rs:
ok....I try to make a best photo.
With davide I often feel me, but I have not told him of this recent problem.....I try to ask.
However you don't abandon me to you because I am Italian  :roll:
 :-D

KX500freak:
i make it little more clear now,

A = the rod coming out the clutchcover
B = the valve command-rod
C = the cover for the connection housing


is A jammed ,because i see a clamp on it that holds the rod?
or is B jammed ,what in combination with your valve probs ,sounds logic

anyhow the room between A & b is to big for correct connection ?
that,s what i see from this pic?

allready made new pic peppe?

KXcam22:
I'll try not to confuse things more. Is there not supposed to be a lever that connects A to B?  The A rod rotates with the governor mechanism inside the sidecase.  The B rod should freely pull in and out.  The lever has a pin that fits into the groove on the B rod.  As the A rod rotates the pin pulls the B rod in and out.  I don't think that the A rod and lever move freely but if you start the bike an rev it, you will be able to see it rotate. Hope this helps. Cam.

peppe70rs:
THANKS BOYS..........
A QUESTION:  I CAN OPEN THIS WIDE CALMLY AFTER TO HAVE REMOVED THE OIL? 

Navigation

[0] Message Index

[*] Previous page