Maintenance & Technical > KX500 Original

jetting suggestions for high 20's f

<< < (2/2)

mdw471:
Thanks for all the jetting help Hillclimb#42, kaw rider, and KXcam22

plowed tt track on the ice + 2000 KX500 = YEAH! YEAH! YEAH!  :-D

Mark

p.s. two up on the main and one needle clip richer seems to work fine...no better than fine....really great   :-)

Polar-Bus:

--- Quote from: mdw471 on March 02, 2008, 02:12:15 AM ---Thanks for all the jetting help Hillclimb#42, kaw rider, and KXcam22

plowed tt track on the ice + 2000 KX500 = YEAH! YEAH! YEAH!  :-D

Mark

p.s. two up on the main and one needle clip richer seems to work fine...no better than fine....really great   :-)


--- End quote ---

I've been running my 500 all winter out on the ice. I am running a 178 main, #50 pilot with great results. No plug fouling, and great overall running behavior I run 100% uncut CAM II fuel, so if you're running pump fuel, you might want to jat a tad richer on the main. If temps are in the low to mid 20's I place a sheet af cardboard over one rad to allow temps to properly come up. But keep in mind, now it's warming up, I anticipate leaning out my jetting in the coming weeks as temps hover around freezing and above.....I am running 14/45 gearing. Some propane heat on the cyl for stone cold starting helps out huge. Kicking over a 500 in the teens for temp is a PRICK !!!!  Heres a few pics of the "sno cone" machine: LOL

Navigation

[0] Message Index

[*] Previous page