Maintenance & Technical > KX500 Original

KX500 Spark plug Question??

(1/2) > >>

dans89kx500:
Hey, do you'all run a BR9EG NJK plug? I've been having some trouble starting my bike lately. It seems like either I'm not getting enough spark or fuel (I just had the carb cleaned).

Thanks for info,

Daniel in Vacaville

dans89kx500:
Or maybe CDI box?

TerMaaten KX500:
when the question is spark plug & KX500 the best answer is  BR8EIX   NGK

feel the power

stewart:
ngk is the best plug for the kx ......i did alot of plug testing.. a 8 heat range should only be consdered for a completly stock and used k5.. a 9 heat range for the thingasket or up to about .020 cut from head.. i run a 10 heat range with 15.5 compresion ..at optimal jetting...020 to .025 gap works well  .. and i have not been using the fine wire plug tips

kaw rider:
buy a spark tester. if it can't jump a 1/4" gap then check your flywheel. i found a problem when i was on the dyno with one of my flywheels.

Navigation

[0] Message Index

[#] Next page