Maintenance & Technical > KX500 Original

light coil idea

<< < (13/16) > >>

nd4speed:
The 1986 KX500 stator and flywheel can be used on the 89-04 KX500.
The 1986 KX250 Stator and flywheel is same as 1986 KX500
The 1984-1987 Tecate 3 wheelers and 1987-88 Tecate 4 have lights and have a stator and flywheel that can be used on 1986 KX250
Therefore, the Tecate stator with lighting coil and flywheel can be purchased new for around $250 and be used on 89-04 KX500

The tecate flywheel is quite hefty.

There is thread on here were a guy was trying to do this and posted an old magazine article about the Baja 1000 KX500 from the 80's that had a Tecate stator and flywheel

nd4speed:
this guy used KDX200 stuff:

http://www.kxriders.com/forums/index.php/topic,6603.0.html

Maybe I'm not on the right track and you guys want 1000 watts of power and monster spot lights on the front of your KX.

alward25:
The Tecate lighting stator is weaker than the moose lighting stator for $69.  Great research though.



--- Quote from: nd4speed on June 15, 2010, 01:18:06 PM ---The 1986 KX500 stator and flywheel can be used on the 89-04 KX500.
The 1986 KX250 Stator and flywheel is same as 1986 KX500
The 1984-1987 Tecate 3 wheelers and 1987-88 Tecate 4 have lights and have a stator and flywheel that can be used on 1986 KX250
Therefore, the Tecate stator with lighting coil and flywheel can be purchased new for around $250 and be used on 89-04 KX500

The tecate flywheel is quite hefty.

There is thread on here were a guy was trying to do this and posted an old magazine article about the Baja 1000 KX500 from the 80's that had a Tecate stator and flywheel

--- End quote ---

BDI:
I have that little coil on my 500. I used it to run a whip light and other little lights on my sand bike. I also had the the e-line coil on the bike at the same time that ran two 6" lights off the front. Boy I really thought I was s**tting in high cotten but now that I own a bike with half the wattage, half the weight worth of crap,twice the light and twice the dependability I realize how poorly designed my lighting was. I don't mean to speak for everyone but I think what we wan't is a 100 watt system that puts out a 200 watts of light even when the bike is at idle. that is what we are working on and the point of this whole post.

Speedway73:
I have an E-Line set-up with a new stator winding that i've yet to install. Besides the weight...what is the general negative consensous with using the E-Line set-up??

It's going into my '86 Tecate KXT 500 project and will power the stock headlite and taillite only...no tru serious nite running.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version