Maintenance & Technical > KX500 Original
crank stuffer
bigbellybob:
look at these crank stuffers
http://www.ozebook.com/compendium/t500_files/grant/imagepages/image34.htm
stewart:
great pictures
maddoggy:
stewart, sorry for the late reply. i did some looking at the crank stuffer idea i had and i decided that the idea i had will not work. however i was wondering if it would be possible to extend the tabs on the bottom of the cylinder slightly. 1/4" worth of extention would help in a similar way as BDI's latest intake mod. by the way, good thinking there Brian, do you plan to fill a little more? MADDOGGY
BDI:
Just to let you know the cylinder I'm welding on is junk I try out my ideas on it and there is no stress. I have a good grasp on two stroke design but applying my ideas can bee tricky so I do it to that cylinder for the practic of doing it. what I have done could easily bee done and probably done better with some sort of epoxy like JB Weld or my favorite marine tex. If you did this and you are using a V-force you will have to clearance for the petal screws but thats it. I don't think you can go wrong with this. You can over stuff a motor but you would have to work real hard to achieve it.
kaw rider:
i have some ratio number for big single 2 smoke motor. do anybody have the ccr numbers.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version