Maintenance & Technical > KX500 Original

magic head

<< < (3/4) > >>

doordie:
Nice work Steward! :evil:

Mine got the same angle 4*,two degrees more than pistondome.
Centred plug though! :wink:

doordie:
Here we have a "Magic Head " from Mike Melde,I will make one of these soon! :wink:
With o-ring sealing and removed attchment... 8-)
And runs with a flat-top piston which is lighter and gives more RPM. :evil:

demographic:

--- Quote from: doordie on April 11, 2007, 06:29:07 AM ---Here we have a "Magic Head " from Mike Melde,I will make one of these soon! :wink:
With o-ring sealing and removed attchment... 8-)
And runs with a flat-top piston which is lighter and gives more RPM. :evil:

--- End quote ---

I take it thet the wires are coming from a solid state temperature sender?

I have looked into getting one of those as they are avaliable in M6 thread which if I remember right is the same as the normal air bleed screw at the top of the head.

Most other temperature senders have a huge thread (1/8 NPT) which would need another hole in the head.

Good:
I'm also interested in this.  What kind of power increase is there?

kaw rider:
stewart
how much do you charge to machine the head for 4 degree angle. are you guys welding at the squish band area to add filler or removing alot of the height to get to the flatter squish angle.

Navigation

[0] Message Index

[#] Next page

[*] Previous page