Maintenance & Technical > KX500 Original
Do you clutch every gear?
KXcam22:
Sly,
Interesting questions and a great topic for discussion. In my opinion, using the clutch is definitely the easiest on your trans but a properly executed power shift is not that much harder on it. A drag race to the first corner easily proves that a power shift is faster. I think that is also why drag bikes use those air powered shifters that momentarily kill the ignition during the shift. My skiboat does the same thing-although obviously to make things simple not fast. A properly executed power shift is more than chopping the throttle, it involves chopping to unload the gear dogs and move them away from each other, then shifting exactly while applying the throttle. Applying the throttle spins the main gear shaft and helps the incomming sliding gear mesh together with the the fixed shaft gear (similar to the double clutching technique required on an old tractor or bus). Done correctly it is butter smooth. I can't answer the arm pump question. I trained my forearms extensively in my formative MX years and still never get any arm pump. It could make a huge diff I suppose depending on your arm condition. There is also another technique to powershift using the clutch where you hold the throttle wide open and preload the shifter with your foot and then stab the clutch quickly to make it shift. The gears are held together by the engine torque until the clutch is stabbed. Again this is like premix ratios and global warming. Everyone has their own ideas and thinks(hopes?) they are right. I've been powershifting gears in the bush on my KX since 92 and it still shifts the same as new. :-D Good topic. Cam.
ps watch...now after saying all that I will probably blow a gear my first spring ride.....
FuriouSly:
Nice post Cam...
--- Quote ---Just wondering if you guys clutch every gear. Since it is a mesh drive, I thought I could get away with it (raredesign)
--- End quote ---
I think we need to clarify the question a little more:
Clutchless shift up and down ??
Clutchless shift for speed, for fatigue (edurance), to control (left hand firmly on grip), or some other reasons ??
I must admit that I do clutchless shift sometimes when I am up against a fast adversary (like Arigato or 1AllDave) in a race up comp hill or in a straight line, but my start is usually bad enough to negate any slight speed advantage from the clutchless shifting :cry:
On another note, clutched shifting can be as bad or even worse for your trans if done poorly. Pulling in the clutch and waiting too long to up or down shift without an RPM adjustment is bad. Add a lazy shift engagement in there and you will put the hurt on the trans as well.
Try some different techniques, get your lever/cable/shift lever adjusted and operating smooth, work on arm/hand strength, maybe try some different equipment (clutch brand/spring tensions, hydraulic, longer lever with perch moved inward..) but mostly just get out there and RIDE!!! because this is where we are when we are not riding and quite frankly... this ain't as much fun... although the company is tolerable :roll:
Sly
c-152:
For me, I don?t get arm pump so it is just done out of preference and ease of use. Obviously situations dictate different shifts and it comes down to preferences. I am with you 100% that the main thing is to get out and ride regardless. This is one of those ongoing debates that would last forever. Unfortunately it is 10 below here in Ohio and I have not yet finished studding my tires so no riding for me yet.
P.S. - now that I have bragged about never having trans trouble or arm pump I will probably get arm pump way out in the middle of nowhere and break my tranny thus having to push it back with my aching arms ? (get out bad thought).
raredesign:
I am not certain what to think. My forearms are definitely strong. I can crack a walnut in my hand so I think my grip is good enough. I am trying to losen up on the grip of the bike though...I do have a tendency to stay rock hard on the handlebars lol. I think it is just cause I am new to riding a kx5, so yea, maybe it has to do with the endurance of my muscles...
any thoughts for endurance exercises?
ebers17:
Last season on my 250 I used the Boyesen Shokout grip. It seems a little weird to get used to at first, but I love it now and I know I ride a little looser and never have much problem with armpump because of it.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version