Maintenance & Technical > KX500 Original
horse power
stewart:
hello all i am new here i have three kx 500 bikes a 2000 a 2001 and a 2003 i have also 2 spare engines i have been buying riding and modifying big bore kx s since i had my kx 420 in the 80s i have had several other kxs since any way i had post my dyno sheets on everything 2 stroke to get help making more power i have made 77 rear wheel horse on land and sea dyno and 61 foot pounds of tq at 500cc with vp u2 fuel 44 lectron max power cyl i ported and raised .050 v force reeds pro circut 2 pipe and sil encer 15.1 to 1 comp 2 drgrees atiming adv about 200 dyno pulls any input would be helpful
gowen:
Can you post up the dyno results (once you hit 10 posts) or just e-mail them to myself.. Nice results.
hughes:
Welcome to the site. Three 500's you are so lucky.
stewart:
thanks for welcome i would love to post dyno sheets there posted on the kx 500 thread on everything two stroke i was looking for ides of what to try for more power
doordie:
Hello Steward,nice to have you on board,we will talk about making horsepower to KX500 if you want.
I have seen your dynos and I?m very impressed for sure!
I put them on here if it?s okay for you,just say the words.... :evil:
I want to know what needles you use in Lectron 44mm for standard gasoline up to 103 oktan,not with blended alcohol that you maybe use also. :|
I got one and I will start test with Lectron as soon as possible and must have some guidelines if you want to share? :wink:
You talked about only 2 degrees advance,very little for sure,at what rpm do you measure it and do you use stroboskop or not?
Many questions here! :-D
To be continued.....
Navigation
[0] Message Index
[#] Next page
Go to full version