Maintenance & Technical > KX500 Original

Foot Peg Mounts

<< < (2/2)

KXcam22:
Hughes,
  I'm not sure about just welding on the pin mount, but usually it is best to modify the new peg (in this case a newer KX peg) and weld it around//over your old peg (with a bunch cut away).  This way most of the old peg mount and structure (& strength) is retained, but you have the new peg boot surface.  I did this for my sons PW50 with good results (sorry no pics). If you can, post a pic of your old peg so I can have a look. Thank. Cam.

hughes:
Thanks. I'll see what I can come up with this week for a photo. I think after I get another set of pegs to look at it will all come together for what I need. Thanks again.

hughes:
Thanks to Danger4u2 I got some nice pegs off e-bay $29.95. I'll post some pictures of the my old pegs and bracket and the new pegs and see what we can come up with.

hughes:
Took me alittle while but got those brackets welded on my 87 500 so I can run the new style pegs. Thanks Kxcam22 for the drawing of the bracket which worked great. Here's a photo of my 87 500 with 04 kx500 peg,pins,springs.

Navigation

[0] Message Index

[*] Previous page