Author Topic: springs and valving for 240lb rider  (Read 267 times)

0 Members and 1 Guest are viewing this topic.

Offline 1980mcneil

  • Full Member
  • ***
  • Posts: 88
Re: springs and valving for 240lb rider
« Reply #15 on: June 27, 2020, 05:53:10 AM »
OK so thereís no cheaper alternative for revolving? The race tech valves are the only things I found. I figured there might be a way to just change the valve in on a OEM set up for a heavier person. But I have not yet been able to find that.Since that is the case I probably wonít drop another couple hundred bucks into it. I thought if I could change the valve in on the stock set up for a decent price I would definitely try it. I donít think Iím gonna buy the gold valves. Not for the woods riding that I do.
2004 kx500
Accu-products decompression Valve
Powerdynamo heavy flywheel ignition
Pro-Circuit Platinum II / FMF PowerCore 2
Moose racing Reed spacer
Baja design duel sport kit
Plated.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,142
    • OEM-CYCLE QUALITY USED PARTS
Re: springs and valving for 240lb rider
« Reply #16 on: June 27, 2020, 12:50:08 PM »
Pro Action can set you up with valves and shim stacks ready to go:

https://pro-action.com/



And don't worry, they can set up your suspension for any level of riding..

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.