Maintenance & Technical > KX500 Original

where to find reed spacer in canada?

<< < (2/2)

Danger4u2:
I can't help find one in Canada. But Parts Unlimited will have it.
I have a friend that works at House of Kawasaki, he can save me any where from 5% to 40% depending on mark up of the part. He ordered mine from Parts Unlimited my cost was $22. plus tax. The stock bolts had a 8mm head, new bolts that came with spacer had 10 mm head, not as easy to work with. If spacer is any thicker you will have carb to frame clearence problem. Most people can't make one cheaper, comes with 2 gaskets and the bolts. Hard to beat. It's tight before the spacer, I used a cotter key puller to get air intake boot on the back side of carb. I washed the bike real good before install. Then took the air hose to blow off any thing the wash didn't remove.

http://www.mooseracing.com/index_FLASH.jsp

With the spacer I also added a new pipe.

$229.99

KAWASAKI KX500'88-04 GNARLY PIPE

Product #: 020055
https://www.fmfracing.com/products/catalog.aspx?CategoryID=57&ItemID=020055

And added a new silencer.

$99.99

KAWASAKI KX500'88-04 ISDE SILENCER

Product #: 020223
https://www.fmfracing.com/products/catalog.aspx?CategoryID=64&ItemID=020223

Don't forget a pipe guard. I haven't installed it yet. It seams like it won't fit, I will try to install it today. I'll keep you posted on the fit.

KPGPC500.1 - KAWASAKI PIPE GUARD PRO CIRCUIT
Carbon/Kevlar PIPE GUARD PRO CIRCUIT for KAWASAKI KX500. Fits 1988-2004.

http://www.elineaccessories.com/Shop/Results.asp?category=10&secondary=9&keywords=Pipe%20Guard&Submit2=GO

Danger

Navigation

[0] Message Index

[*] Previous page