Maintenance & Technical > KX500 Original

1996 KX500 shift selector shaft replacement

(1/2) > >>

Macs69:
Good morning, all. How difficult of a job is it to replace the shift selector shaft. I know that it is accessed by removing the clutch cover, and that the clutch basket would be removed. From what I understand, the cases would not have to be split. Is this correct, and is it a difficult job?

umberto:
Hi macs69, welcome to the site. You are correct, you do not need to split your cases to remove the shifter shaft. You will need to remove all the items you listed and the shifter, and it will come out with no issues.

sandblaster:
+1
Then replace with a 94-04 kx500 shift shaft.
You will be able to use a KX450f shift lever.
I like the Hammerhead levers.
You can get the 5 10 15 or 20mm longer then stock.

Macs69:
Excellent, and great info, guys!

Thank you very much, and I appreciate the welcome!

Uncle tony:
Will the 94 to 04 shift fit a 1990 kx500?

Navigation

[0] Message Index

[#] Next page