« previous next »
Pages: [1]   Go Down

Author Topic: KX 500 / 250 / 125 H1 1990 Triple Clamps Off Set  (Read 3814 times)

0 Members and 1 Guest are viewing this topic.

Offline Kawafornication

  • Full Member
  • ***
  • Posts: 147
KX 500 / 250 / 125 H1 1990 Triple Clamps Off Set
« on: September 18, 2018, 10:00:42 AM »
Just looking over my frames today as going to get them powder coated so wanted to be sure I get the best one to keep and noticed I have got KX 500 clamps on one, KX 250 clamps on the next and still have a spare 125 frame with 125 clamps on, I always assumed they were the same through out the range being all have 41mm forks, does anybody know if the off sets are different and if so what characteristics will I get from each set? My guess would be for somebody to put 500 clamps on a 250 there must be a good reason other broke his 250 ones and could not find another set  :?
Logged

Offline umberto

  • Administrator
  • Hero Member
  • *****
  • Posts: 2,488
  • First Ride 02-02-19
Re: KX 500 / 250 / 125 H1 1990 Triple Clamps Off Set
« Reply #1 on: September 18, 2018, 10:07:37 AM »
This sounds like a KXDino question.  Be patient as he isn't on every day, but he will probably know the answer right off the top of his head
Logged
Perhaps I have a dirt bike addiction?

03 KX 250/88 KX 525/2017 KX250F - Goliath
17 KX250F/04 KX250
04 KX 250 - Lunchbox's Bike
05 KX 125/144

Offline Kawafornication

  • Full Member
  • ***
  • Posts: 147
Re: KX 500 / 250 / 125 H1 1990 Triple Clamps Off Set
« Reply #2 on: September 18, 2018, 11:18:02 AM »
Thanks, would be good to know what the differences are between the three, surely they wont all be the same if Kawasaki have gone to the effort of putting the numbers raised proudly on them!  :?
Logged

Offline Kawafornication

  • Full Member
  • ***
  • Posts: 147
Re: KX 500 / 250 / 125 H1 1990 Triple Clamps Off Set
« Reply #3 on: October 10, 2018, 10:33:02 AM »
Anybody got any ideas on this one please?? If the KX500 clamps off set works out I will be getting some of those lovely looking KX Guru clamps and upgrading the forks! Thanks in advance (Y)

http://www.kxriders.com/forums/index.php/topic,17396.0.html
Logged

Offline Kawafornication

  • Full Member
  • ***
  • Posts: 147
Re: KX 500 / 250 / 125 H1 1990 Triple Clamps Off Set
« Reply #4 on: October 10, 2018, 10:37:28 AM »
Here is a picture of the clamps on my KX 250 1990, look tatty and will need changing regardless, note that they say KX 500 on them!

Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,272
    • OEM-CYCLE QUALITY USED PARTS
Re: KX 500 / 250 / 125 H1 1990 Triple Clamps Off Set
« Reply #5 on: October 10, 2018, 12:13:47 PM »
They look the same, they fit the same... Oh look, they are the same  :mrgreen: FITS 90 KX250 KX500 44039-1190
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Kawafornication

  • Full Member
  • ***
  • Posts: 147
Re: KX 500 / 250 / 125 H1 1990 Triple Clamps Off Set
« Reply #6 on: October 10, 2018, 01:35:07 PM »
Ok so Kawasaki made exactly the same clamps with exactly the same off sets to fit three models in 1990 but have ensured that 125/250/500 is stamped on the underside incase they were not sure what bike to fit them on in the factory  :-o  :?   :lol: that is nuts but great news I guess, I was expecting each set to have different off sets at least! Thanks for the info (Y)

I will have to put Guru clamps + KXF forks on my hit list as well, at least that is one KXF wheel I wont need to space out, dohhhpp will also need a new front calliper  :cry:
Logged
Pages: [1]   Go Up
« previous next »