Maintenance & Technical > KX500 Original

Muffler / Silencer - Blow back

(1/2) > >>

JAD777:
Does anyone have a problem with blow-back (Term?) at the joint between the muffler and the silencer?  I don't seem to be having a good connection (the joint doesn't line up straight).  After riding (not too hard) for a day, it have to clean up the oily/black stuf from my frame and platstic.

I have a 95 KX5 and havn't been able to get the silencer apart (without damage) yet.  I've order a replacment but don't want to try anything too radical incase I wreck it and can't ride.

Other then having some problems with the idle, it runs good - Very strong and it's not fouling the plugs.

If you could send a picture of your muffler connection, it would help ensure mine is setup correctly.

Thanks...

hughes:
I use high temp silcone on my 87. I have seen stainless clamps with a rubber seal to clamp the two for newer 500. Go to e-bay and type in kawasaki kx and hit search. look trough the pages until you find them. They come in diff. colors.

hughes:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=35596&item=4564528457

Try this.

mikesmith:
If your talking about the joint where the silencer body connects to the silencer pipe,yes.After awhile it blows out the Honda bond I use to seal them in a small spot and I just reseal it.If you find a cure let me know.

KXcam22:
I put a hose clamp on the pipe end. For some reason I never needed one on the silencer end. Drool ended! Cam.

Navigation

[0] Message Index

[#] Next page