Maintenance & Technical > KX500 Original

Bar vibration dampeners

<< < (2/2)

2002KX500:
I have the Fasstco anti-vibe bar inserts. I meant to do a formal review on them, but haven't had time.  I did have the numb hands when I first got the bike.  I installed them and it went away.  The thing is, I bought thermal gloves and rode more..so i couldn't tell you if it was exactly the bar inserts.  I can still feel vibration in the bars, but it doesn't affect me.  I would buy them again.  Any little bit helps.  Good luck.

Kevin

mikesmith:
Weights work,but Pro-Tapers help a lot and fill it with expandable foam,or the ends (straight part) with silicone.Its lighter and cheaper (unless you allready have the lead as you mentioned).

96500:
5dracing,

I measured the inside of the bar end (can't remember the exact size at the moment) then used the closest drill bit for the 6"x6" block of wood. I cast a small piece of wire in a hoop shape into the weight end for future removal. A small amount of silicone holds the weight in place.
As far as adding weight to the bike, I figured I'd never notice a few ounces on a KX500.

Initially to test the bar weight theory, I placed a weight in only one bar end. After riding a while, I did find the side with the weight viberated noticably less.

 Timbowe is right about the breathing thing as well. I try to breath the same way and it works great when I actually remember to do it!

Navigation

[0] Message Index

[*] Previous page