Maintenance & Technical > KX500 Original

KX 500 Stator

(1/1)

Moto Steve:
Hello Everyone,
I recently purchased an 89 KX 500.  One of the mods I want to complete is lighting.  The stator plate on the bike has two coils.  The lighting stator I ordered belongs on what they tell me is a later model stator plate.  Mine appears to be the same as an 88 and older, no spare room for a lighting coil.  My question is, can I use the stator assembly and flywheel for say a 90 on my engine?  The only thing that concerns me is the flywheel.  Is the crank the same across 88 to 90?

Thanks,
Steve

dave916:
Yes, no issues with crank taper same all years
Issues u could have are matching stator wires to cdi
There are two slightly differant flywheel/stators 89on  some have mountings for lighting coil and some Dont

Moto Steve:
Thanks for the help.  Pretty sure I will have to get a new CDI like you said.  The schematics I have found show the exploded view of both versions for 89.  The CDI is different between the two versions.

Thanks again.

Navigation

[0] Message Index