Maintenance & Technical > KX500 Original

Help needed. Rear shock valve diagram!

<< < (2/3) > >>

sandblaster:
I have no internal info on the 91 shock but I do have some limited info on my Race Tech shock rebuild for the 97-04 here:

http://www.oem-cycle.com/forum/viewtopic.php?f=5&t=677

alward25:

--- Quote from: sandblaster on January 11, 2015, 04:19:54 PM ---I have no internal info on the 91 shock but I do have some limited info on my Race Tech shock rebuild for the 97-04 here:

http://www.oem-cycle.com/forum/viewtopic.php?f=5&t=677

--- End quote ---

I know there may or may not be a 91 shock in your inventory :wink:
Calling pro action or one of those places might have something to help

sandblaster:
Yes, there are two 91-93 shocks in my inventory.
Are you volunteering to pull them apart and reassemble them to get shim stack info?
If so I'll order up a couple of seal heads and have you swap them out while your in there  :-D
In fact, I have many other shocks I could send you so you can get the shim stack info.  :evil:

Good call on calling Pro Action.
They may not mind giving out the stock shock shim stack info.

dpavelko:
Thanks Guys. I think my best bet may just be getting another shock for spare parts anyhow. Ill keep an eye out on eBay. I'll try and give Pro-Action a call today.

alward25:

--- Quote from: sandblaster on January 11, 2015, 07:33:28 PM ---Yes, there are two 91-93 shocks in my inventory.
Are you volunteering to pull them apart and reassemble them to get shim stack info?
If so I'll order up a couple of seal heads and have you swap them out while your in there  :-D
In fact, I have many other shocks I could send you so you can get the shim stack info.  :evil:

Good call on calling Pro Action.
They may not mind giving out the stock shock shim stack info.

--- End quote ---

I will rebuild and get all the info you need.  I have all the right tools, and a hookup for sue soon parts too.  Also a heck of a good camera.

Navigation

[0] Message Index

[#] Next page

[*] Previous page