Maintenance & Technical > KX500 Original
88 power valves
pippin07:
hi all i have stripped the teeth in the power valves and i am looking to replace them and having a hard time finding them for an 88 kx 500 as they changed the design in 89 can anyone tell me where I might be able to find some or can i modify a later set any info will be appreciated
sandblaster:
eBay is your friend...
pippin07:
cheers but ebay isnt being to friendly at the moment ha ha wish someone made repos of these
sandblaster:
Cylinder with valves
http://www.ebay.com/sch/i.html?_trksid=p2050601.m570.l1313.TR0.TRC0.H0.X88+KX500+CYLINDER&_nkw=88+KX500+CYLINDER&_sacat=0&_from=R40
He does not know that the cylinder can't be bored oversize as it is.
It needs to be stripped, repaired, and re-plated.
Or, it needs to be sleeved.
So, what he is selling is a core that needs to rebuilt.
I would try to get him to take a much lower offer.
sandblaster:
Also, 87 and 88 used the same two exhaust valves 12005-1080
Navigation
[0] Message Index
[#] Next page
Go to full version