Maintenance & Technical > KX500 Original

changing fork seals

(1/1)

fast500#12:
i've got a blown fork seal and i have never pulled apart forks. is there any thing that i have to look out for when i take it a part?

mikesmith:
I think Cam posted this,but try pulling the dust seal down and run a piece of 35mm film or a stiff business card between the fork tube and seal.I use WD-40 at the same time to help flush dirt out,it may just be dirt and not a bad seal.

Rick:
Yup, cleaning the fork seal can save you $ and time.  Doesn't always work, but worth a try.  I use carb cleaner or brake cleaner to clean the seal while inserting a thin card under the lip.

As for taking the fork apart, I'll write a quick instruction post tonight to help.  Not really that tough.  Keep checking the site for my post.

Rick

fast500#12:
thanks, i tried the film thing but there was no joy.

Navigation

[0] Message Index