Maintenance & Technical > KX500 Original

jetting with pod filters

<< < (2/2)

sandblaster:
Stock everything with a No Toil filter...
But, mine gets wheel swaps for trips to the dunes..

Motorrad:

--- Quote from: yeomans on May 22, 2014, 12:30:23 PM ---What are you street legal / plated guys running ?
Had pods on a Gt750 once, sucked alot more air.

--- End quote ---

I'm running Lectron carb and not stock motor. So my numbers are no help

yeomans:
Are you running the lectron on your sumo?

Goat:
I've got a 4" by 4" Uni filter Pod on my 87 K5 quad Goatzilla. At 700ish feet above sea level I'm running 55 pilot 165 main on a PWK. Don't remember if it's a 38mm or 39mm carb. About the only thing different between mine and anyone elses is I custom built my own pipe so my jetting may be too lean for someone with a unmolested pipe. I'm also running an outerwears filter on top of the uni inside a 5 sided airbox I built. It has an open top to pull in all the air it needs from under the seat without getting coated in the elements from the rear tires.

yeomans:
I fitted up one of the fmf pipes for the af conversions with a Q silencer for the cr 500. I'm also running a v-force 2 with the uni pod as well.
I hadn't seen much about the older motors switching from mikuni's, and given the few slight mods I've made I wanted to see if anyone else is doing anything similar.
I'm like 4 feet above sea level :-D

Navigation

[0] Message Index

[*] Previous page