Maintenance & Technical > KX500 Original

Project "I needed to clean the air filter so I blew the motor"

<< < (5/73) > >>

sandblaster:

--- Quote from: Motorrad on May 21, 2013, 01:23:53 PM ---
--- Quote from: sandblaster on May 21, 2013, 01:22:29 PM ---What are you using to remove the aluminum?

--- End quote ---

swimming pool acid, and q-tips     its cheap.     eats the alum off VERY fast...    and wont touch the nikasil.

put it on.. when it stops bubbling,   the alum is gone,.


also very good for finding cracks    HINT HINT......   (on newly plated, cyls also)

--- End quote ---

I guess you wouldn't want to get it anywhere else...  :roll:

USMC 500:

--- Quote from: Motorrad on May 21, 2013, 01:34:08 PM ---
--- Quote from: RoostDaddy on May 21, 2013, 01:31:43 PM ---
--- Quote from: Motorrad on May 21, 2013, 12:08:01 PM ---"Thou shalt not run 2 sizes too small main in a 41mm carb on a K5 wide open down fire road with s**tty oil."     - ˭M˭  3:16



--- End quote ---
Is it okay to ask what size main was in it?

--- End quote ---

165     and thats on him... I didnt have any hand in jetting it that lean..

--- End quote ---

I could have sworn that I had a 170 in there......thats why I didn't even think to look at the jetting.  No excuses......still very much my bad!!

Motorrad:

--- Quote from: sandblaster on May 21, 2013, 01:36:07 PM ---
--- Quote from: Motorrad on May 21, 2013, 01:23:53 PM ---
--- Quote from: sandblaster on May 21, 2013, 01:22:29 PM ---What are you using to remove the aluminum?

--- End quote ---

swimming pool acid, and q-tips     its cheap.     eats the alum off VERY fast...    and wont touch the nikasil.

put it on.. when it stops bubbling,   the alum is gone,.


also very good for finding cracks    HINT HINT......   (on newly plated, cyls also)

--- End quote ---

I guess you wouldn't want to get it anywhere else...  :roll:

--- End quote ---

actually it really doesnt attack the  jug alum that much... but man does it eat melted piston.

USMC 500:

--- Quote from: conbread on May 21, 2013, 01:21:55 PM ---which Maxima was he running??

--- End quote ---

This is what I was running at 40:1..........


This is what I will be running from now on........



As far as coolant goes I was running plain water with this........


This is what I will be running from now on.......



OR



The failure of the water as coolant, the failure of the Maxima burning off due to low flashpoint, the failure of the owner to have the proper jets.......all these factors led to this end result :x

But we're working on it to make it all better. :wink:

Motorrad:
I bold and underlined the main problem for you!    the others would have been fine with proper jetting.       :roll:            ideal... no.. fine. yes



fun looking at the msds for Super M

its up to 15% colman camp fuel..

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version