Maintenance & Technical > KX500 Original

Crankshaft seal?

(1/2) > >>

HSC Racing:
Oil is leaking out from around the crankshaft and I'm assuming it's the seal.  Can that seal be replaced without splitting the case, and if so, how difficult is it?  Thanks, Greg

DoldGuy:
Crank seals are captive.....have to be installed from the inside....cases need to be split.
DoldGuy

Foxx4Beaver:
If you have'nt already done so...now would be the time to replace ALL the bearings and seals while you have it apart,that way you won't have to tear it apart again sooner,rather than later...just a suggestion.

kkvslayer:
correct me if  Im wrong but the stator side seal should be able to be changed without splitting the cases

HSC Racing:

--- Quote from: kkvslayer on September 06, 2012, 05:32:31 AM ---correct me if  Im wrong but the stator side seal should be able to be changed without splitting the cases

--- End quote ---

Sorry for the dumb question but what side is the stator side?

Navigation

[0] Message Index

[#] Next page