Maintenance & Technical > KX500 Original

headseal

<< < (2/2)

doordie:
Kxcam22!

My knowledge about the squishclearance for big twostrokes is minimum 1,3mm with a new rebuild engine who is checked often.If you don?t rebuilt so often set it for about 1,5-1,6mm and you have a "safe"clearance.
But always measure it after thighten head/cylinder/engine and not only with calculate figures. :wink:
It?s many different squishclearance from stock but always to much. :lol:

I come back later with info about different thickness of gaskets.

Folke,can you help me out there?

//doordie

Folke:

--- Quote from: doordie ---Kxcam22!

My knowledge about the squishclearance for big twostrokes is minimum 1,3mm with a new rebuild engine who is checked often.If you don?t rebuilt so often set it for about 1,5-1,6mm and you have a "safe"clearance.
But always measure it after thighten head/cylinder/engine and not only with calculate figures. :wink:
It?s many different squishclearance from stock but always to much. :lol:

I come back later with info about different thickness of gaskets.

Folke,can you help me out there?


Ok i will help you
Gasket-head with partno.and thicknes.
11004-1276 T=1.0
11004-1209 T=0.4 (Std.)
11004-1187 T=0.2

//doordie
--- End quote ---

Navigation

[0] Message Index

[*] Previous page