Maintenance & Technical > KX500 Original
1985 Crankcase reassembly Question
Motorrad:
I am not familiar with the 85 lower ends... or I would chime in... anyone know if the shifter stuff is teh same (shift pawl)
awak100:
on the shifting drum theres like 5 or 6 notches on it. theres one that is different than the rest. the one that is different is neutral. thats the one ypu want it notched in.
dieselcamper01:
Finally getting back to this project. I do have the cases together and so far so good but I ran into another snag. Mayber I should start a new thread but I will try it hear.
I cannot seem to locate the correct head gasket for the bike. The kit Dennis Kirk sent me was totally wrong. I can get the base gasket from the dealer but no head gasket. Anyone know of a source for that?
And just an FYI. The manual has the information wrong on whick location the shift forks go on for the output shaft. I had to switch them to get it to work. D'oh!
sandblaster:
I see them listed for 86-88 but nothing for 85 or older.
I'm sure there must be someone with a line on them...
1989kawasaki:
Cmsnl has them in stock.
They usually have what they list, I got a few obsolete Honda parts from them
http://www.cmsnl.com/kawasaki-1985-b1-kx500_model11965/partslist/B3.html#results
If I were you I would order a bunch
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version