Maintenance & Technical > KX500 Original

Vibration Reduction

<< < (4/5) > >>

suva57:

--- Quote from: Suva on April 23, 2012, 12:50:32 PM ---Cheep option is to fill the bars with expanding foam.  Can shoot it in your frame as well.

--- End quote ---
This works great for a little while, after a short time the foam starts disintegrating and you're left with a mess and no vibe damping. Buy some flexx bars and take some midol (seriously).

dave916:
pull the flywheell cover and check the flywheel for up\down and SIDE movement  ,
U could even run the motor and visual watch the flywheel for movement 
if it moves up/down is usually a sign of  not trued withen spec  crank

The vibration and stress on bearings is not the only issue with a non trued crank, as is rotates it will be slightly changing in width [more than the clearance in the c3main bearings ]  which will force the main bearing spin\move sideways on the shaft, [common on the kx }

I think we should all be anal about about truning our cranks

maybe not your problem but worth a check as 50% of kx5 motor have spun bearing on crank, maybe i am really unlucky with kx5 motor :-D

joko:
 I had the carpel tunnelrelease surgury. I can ride for hours without any numbness. Careful with taking motrin or aspirin before you ride - it thins out your blood and a crash may lead to excessive internal bleeding, or at a minimum, a normal bruise turns into a big contusion. I have protapers with the fasstco inserts and liqued "bar snake" with spyder grips for max vibe reduction

jgturbo:
How about a custom flywheel that doubled as a vibration damper? Something like an inner hub, outer ring, and elastomer in between.

kwakman:
I'm with you on the cranks Dave.One thing that will help you loosen your grip is the clear grip stuff that you put on tank to help gripping with knees.Can't remember the brand name. On the subject of bar grip/arm pump, I have big hands, and have come to the conclusion that by making the grips thicker, it will be more comfortable and spread the load over a greater area. More on this shortly. K.

Navigation

[0] Message Index

[#] Next page

[*] Previous page